Connection Of A Kty Sensor; Connection Of Ptc, Temperature Switch Or Pt1000; Table 25 Connection Examples - KEB COMBIVERT F6 Instructions For Use Manual

8 | Brake control and temperature detection

8.2.2 Connection of a KTY sensor

NOTICE
Settings KTY input
Connection KTY sensor

8.2.3 Connection of PTC, temperature switch or PT1000

Settings of PTC, temperature
switch or PT1000
Connection
38
No protection of the motor winding in case of wrong connection!
Non-observance leads to incorrect measurements and possibly to the
destruction of the motor winding
a) Operate KTY sensors in forward direction.
b) KTY sensors may not be combined with other detections.
Setting dr33 = 0 => KTY84/130
dr33 = 3 => KTY83/110
KTY84
Stetting dr33 = 1 => PTC or temperature switch
dr33 = 4 => PT1000
Thermal contact (NC contact)
Temperature sensor (PTC) or PT1000
Mixed sensor chain
① Connection via shield bracket (if not available, place on mounting plate).
Table 25: Connection examples
TA1
+
TA2
ma_dr_f6-cu-k-inst-20144795_en
TA1
TA2
①
TA1
TA2
①
TA1
TA2
①