Table 23 Encoder Specifications - KEB COMBIVERT F6 Instructions For Use Manual

PIN Signals Description
14, 15 Exciter+/- Only channel A:
Output field voltage for resolver:
Ueff=2.54 V ≙ Uss=7.2 V ±5 %; max. Ieff=30 mA; 10 kHz
Coupling factor for resolver: 0.5 ±10 %
Phase shifting 0° ±5°
25, 26 5.25 V / 8 V Output supply voltage for encoder:
ec14 = 0 => 5.25 V +5 %/ -10 %
ec14 = 1 => 8 V +5 %/ -10 %
ec14 = 2 => automatically, depending on the set encoder type (ec16)
Max. 500 mA total (250 mA per channel)
8, 9 5.25 V Output supply voltage for encoder:
5.25 V +5 %/ -10 %
Max. 500 mA total (250 mA per channel)
18 24 V Output supply voltage for encoder:
Udc=24 V max. 500 mA total (250 mA per channel)
• Minimum P24V_IN - 3 V
• Maximum P24V_IN
19, 20, A_HTL+/- Only channel B:
21, 22, B_HTL+/-
Input HTL signals 10 V...30 V maximum 150 kHz
23, 24 N_HTL+/-
Table 23: Encoder specifications
ma_dr_f6-cu-k-inst-20144795_en
Encoder interfaces | 7
35