Vcc - Led; Net St - Led; Dev St - Led; Opt - Led - KEB COMBIVERT F6 Instructions For Use Manual

3 | Product description

3.13.2 VCC - LED

3.13.3 NET ST - LED

3.13.4 DEV ST - LED

3.13.5 OPT - LED

16
LEDs Status
VCC FPGA booted
NET ST
DEV ST
OPT
VCC ready for operation Device is ready for operation and the LEDs start
NET ST
DEV ST
OPT
Table 3: LEDs at power on
VCC LED col- Description
our
off - Power supply of the control card switched off.
on green Control is supplied with 24 V.
Table 4: Function VCC LED
NET ST LED col- Description
our
off - Device off or booting.
on yellow During switching on, if FPGA is booted.
Blink various depending on fieldbus => fieldbus interfaces.
code
Table 5: Function NET ST - LED
DEV ST LED colour Description
off - Device off or booting.
on red Error
on yellow No error, DC link not loaded.
on green no error, ready for operation.
flashing green No error, is used for identification of the unit (fb32).
Table 6: Function DEV ST - LED
OPT LED col- Description
our
- - reserved for options.
Table 7: Function OPT - LED
Note
FPGA has been booted error-free (approx. 6 s)
with their normal function (approx. 3 s)
ma_dr_f6-cu-k-inst-20144795_en