Analog Input; Analog Output; Table 13 Assignment Of The Terminal Block X2C - KEB COMBIVERT F6 Instructions For Use Manual

4.4.1 Analog input

NOTICE
Specification (differential inputs)
Connection

4.4.2 Analog output

Specification
ma_dr_f6-cu-k-inst-20144795_en
X2C
Table 13: Assignment of the terminal block X2C
Description CAN bus CAN [} 27]
No potential separation of the analog inputs to the control voltage!
Malfunction or defect caused by voltage differences.
a) A potential equalizing line between analog value source and analog input is re-
quired if the analog value is outside the common mode range.
b) Connect potential equalizing line with 0V of the control terminal block.
Number
Name
Terminals
Classification
Input signals
Voltage input
Current input
Common mode range
Connection of the analog differential inputs AN1 and AN2
0...±20mA
4...20mA
*) Equipotential bonding conductor
Number
Name
Connection of the control | 4
PIN Name Notes
9 AN2- non-isolated difference in-
put 2
10 AN2+
11 0V Reference potential
12 ANOUT Analog output
2
AN1, AN2
X2C.7 (AN1-); X2C.8 (AN1+)
X2A.9 (AN2-); X2C.10 (AN2+)
Non-isolated differential input
Current/voltage switchable
DC 0...±10 V
DC 0...±20 mA; DC 4...20 mA
-12.5 V...17.5 V
8 10 12
7 9 11
*
+ +
0...±10Vdc
1
ANOUT
23