Glossary - KEB COMBIVERT F6 Instructions For Use Manual

Glossary

Application
The application is the intended use of the KEB product.
Autonegotiation
Procedure for determining the max. transmission speed.
Basic insulation
Protection against contact with electrical voltage.
BiSS
Open source real-time interface for sensors and actuators
CAN®
Serial bus system running protocols such as CANopen, Devi-
cenet or J1939. CAN is a registered trademark of the CAN in
AUTOMATION - International Users and Manufactures Group
e.V.
COMBIVERT
Proper name for a KEB Drive Controller
COMBIVIS
KEB start-up and parameterizing software
Customer
The customer has purchased a product from KEB and integ-
rates the KEB product into his product (customer product) or
resells the KEB product (reseller).
DC-Value
Diagnostic coverage measures the quality of testing and monit-
oring measures.
DGVU Regulation 3
Electrical installations and equipment
DIN 66019
Information processing; control method with the 7-bit code dur-
ing data transmission.
DIN EN 61131-2
Programmable controllers - Part 2: Equipment requirements
and tests
DIN IEC 60364-5-54
Low-voltage electrical installations - Part 5-54: Selection and
installation of electrical equipment - earthing systems, protect-
ive conductors and protective equipotential bonding conduct-
ors.
Directive 2006/42/EC
Machinery Directive
ma_dr_f6-cu-k-inst-20144795_en
Directive 2014/30/EU
Electromagnetic Compatibility (EMC) Directive
Emergency off
Switching off the power supply in case of emergency.
Emergency stop
Shutting down a drive in case of emergency (not de-ener-
gised).
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part
1: General requirements (VDE 0113-1, IEC 44/709/CDV).
EN 61800-5-1
Adjustable speed electrical power drive systems. Part 5-1:
Safety requirements - Electrical, thermal and energy require-
ments (VDE 0160-105-1, IEC 61800-5-1)
EN 61800-5-2
Adjustable speed electrical power drive systems. Part 5-2:
Safety requirements - Functional safety (VDE 0160-105-2, UL
61800-5-2, IEC 22G/264/CD)
EnDat
Bidirectional encoder interface of the company Heidenhain
EtherCAT®
EtherCAT is a real-time Ethernet bus system. EtherCAT is a
registered trademark and patented technology, licensed by
Beckhoff Automation GmbH, Germany.
HCT
Component for current measurement in the power circuit.
Hiperface
Bidirectional encoder interface of the company Sick-Stegmann
HSP5
Fast, serial protocol
HTL
Incremental signal with an output voltage (up to 30V) -> TTL
IEC 61508
Functional safety of electrical/electronic/programmable elec-
tronic safety-related systems.
Glossary
49