Voltage And Frequencies For 400V Devices; Table 7: Overview Of The Peak Power Device Data; Table 8: Input Voltages And Frequencies Of The 400V Devices; Table 9: Dc Link Voltage For 400V Devices - KEB COMBIVERT F6 Series Instructions For Use Manual

DEVICE DATA OF THE PEAK POWER DEVICES
Device size
Housing
braking option
Max. braking current
Min. braking resistor value
Braking transistor
Protection function for braking transistor
Table 7: Overview of the Peak Power device data
Rated operation corresponds to U
1)
standard asynchronous motor).
The output frequency is to be limited in such a way that it does not exceed 1/10 of the switching frequency.
2)
Notice! Devices with a maximum output frequency higher than 599Hz are restricted for export
The values refer in % to the rated output current I
3)
Observe limitations „3.2.3.1 Overload characteristic (OL) for Peak Power
4)
Precise description A detailed description of the derating
5)
the Peak Power devices".
The cyclic duration factor is additionally limited by the used braking resistor.
6)

3.2.2 Voltage and frequencies for 400V devices

Input voltages and frequencies
Rated input voltage
Rated mains voltage (USA)
Input voltage range
Input phases
Mains frequency
Mains frequency tolerance
Table 8: Input voltages and frequencies of the 400V devices
DC link voltage
DC link rated voltage @ U
DC link rated voltage @ U
DC link voltage working voltage range
Table 9: DC link voltage for 400V devices
Output voltages and frequencies
Output voltage at AC supply
Output frequency
Output phase
Table 10: Output voltages and frequencies of the 400V devices
The voltage to the motor is dependent on the actual input voltage and the control method
1)
(„3.2.2.1 Example of the calculation of the possible motor
The output frequency is to be limited in such a way that it does not exceed 1/10 of the switching frequency.
2)
Devices with a maximum output frequency higher than 599Hz are restricted for export.
/ A
I
B_max
/ Ω
R
B_min
6)
= 400V, rated switching frequency, output frequency = 50 Hz (4-pole
N
= 400V
N
= 480V
N_UL
Max. cycle time: 120 s; Max ED: 50 %
No protection function available
.
N
devices".
„3.3.1.1 Switching frequency and temperature of
U / V
N
/ V
U
N_UL
/ V
U
IN
f / Hz
N
/ Hz
± f
N
U / V
N_dc
/ V
U
N_UL_dc
/ V
U
IN_dc
U / V
1)
out
/ Hz
f
2)
out
voltage:").
16
2
47
18
400
480
280...550
3
50 / 60
2
565
680
390...780
0...U
N_ac
0...599
3
31