Resetting Error Messages; Password Input - KEB COMBIVERT F5 Installation Manualline

Operation of the Unit

4.2.2 Resetting error messages

If a malfunction occurs during operation, the actual display is overwritten by the alarm
message. The alarm message in the display is reset by ENTER.
With ENTER only the error message in the display is reset. In order to reset the error
itself, the cause must be removed or a power-on reset must be made.

4.2.3 Password input

The KEB COMBIVERT is outfitted with a comprehensive password protection. In
dependence on the entered password the following modes are possible:
Display mode
CP_ro End customer menu (CP-Parameter) read-only
CP_on End customer menu (CP-Parameter) read/write
CP_SE Service menu (like end customer menu, but with the original parameters )
APPL Application menu (all parameter groups and parameters are visible)
none Drive mode (COMBIVERT can be put into operation by the keyboard )
The menu admissible for the application is defined by the machine builder. The password
input is generally made over the parameter CP.0. The adjusted password/menu is
maintained even after switching off.
Example: Changing the CP-parameter from read-only to read/write
20
Error
Password
FUNC
ENTER
F/R
ENTER
UP