Table of Contents
Advertisement
11
11.3
Setup order
The Setup menu contains up to 13 menus, depending on the hardware
configuration. It is possible that not all of the setup menus described in this
chapter are active in your system. Disregard menu descriptions that do not apply to
your device.
The initial product setup tasks should be performed in the order listed here.
Instructions are presented in this order on subsequent pages.
Menu
1
About
2
Supervisor
Encoders and Misc
3
4
Supervisor
5
Squareness
6
LEC or SLEC
screen
Scale factor
7
8
Display
Additional setup tasks can be performed in any order.
Menu
Hot keys
Print
Ports
Misc
Clock
Setup configurations can be saved on a USB drive.
Further information:
Menu
Supervisor
74
Setup task
Select a language and view product information
Enter a supervisor password and startup zero
Configure encoders
Load a settings file and startup screen (instead of
manual setup)
Calibrate stage squareness
Correct encoder and machine errors
Set scale factors for parts that expand or shrink
Format the display
Remaining setup tasks
Assign hot keys
Format printing
Configure the RS-232 Port
Set key repeat delay
Set the time and date
"Saving a settings file", Page 106.
Saving settings
Save settings files
Setup | Setup order
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Advertisement
Table of Contents
