Table of Contents
Advertisement
What to do if... | Error messages
Error Message
Unable to find a usable
printer pen.
Not enough memory!
The printer is out of
paper.
The printer is jammed.
Sorry but the number
must be within the range
min value
to
max
Internal Error:
error
information.
Re-entrant in dro.cpp.
The printer mode is incor-
rect.
Invalid angle!
The settings.bin file was
not successfully loaded.
The settings.bin file
cannot be opened.
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Cause
Print attempt, but no
suitable pen was found.
Memory is full.
The printer is out of
paper.
The printer is jammed.
The entered value is
outside the permissible
value.
limits.
Additional
Software error occurred.
Multiple error messages
can be shown, all relat-
ed to memory corrup-
tion.
Software error occurred.
Software error occurred.
The angle used for
teaching the Q axis
encoder resolution is
invalid.
The settings file cannot
be loaded from the USB
flash drive.
The settings cannot be
opened on the USB
flash drive.
Corrective action
Check the printer.
Delete unused data from
memory.
Load paper into the print-
er.
Remove the paper jam.
Observe limits.
Restart the product.
Contact HEIDENHAIN
service agency if neces-
sary.
Restart the product.
Contact HEIDENHAIN
service agency if neces-
sary.
Restart the product.
Contact HEIDENHAIN
service agency if neces-
sary.
Reteach the Q axis
encoder resolution.
Check the USB drive.
Check the file.
Check the USB drive.
Check the file.
13
113
Advertisement
Table of Contents
