Table of Contents
Advertisement
Measuring | MinMax measurements
8.3
MinMax measurements
To perform minimum and maximum measurements:
Move the stage to target the start point for the measurement
Zero or preset the axes datums using the axis keys or the Preset soft key
Press the Menu soft key
Press the Extra soft key
The Extra menu will be displayed
Highlight the MinMax option
Press the finish key
You will be instructed to select a measurement axis
Press the axis key of the desired measurement axis
The MinMax measure screen will be displayed
Perform the required measurements
The minimum and maximum measurement values for the selected axis are
temporarily stored until the MinMax function is run again or the unit is power
cycled
The measurement result will be displayed on the MinMax screen and can be
output to a printer or computer
Further information:
Further information:
Press finish to end the MinMax measurement session and return to the DRO
screen
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
"Printing data", Page 58
"External operation", Page 60
8
55
Advertisement
Table of Contents
