Mounting | Mounting and location on a benchtop
4.3
Mounting and location on a benchtop
To mount the product on a benchtop:
Rest the device on a flat, stable surface
Or
Bolt the device to a stable surface from the bottom with four M5 screws using
the hole pattern shown in the diagram above
4.4
Mounting on an arm
1
To mount the product on an arm:
Secure the Mounting adapter
Bolt the adapter and product to the arm as shown in the diagram above
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
203.2
to the product
1
M5
4
29