HEIDENHAIN QUADRA-CHEK ND 1100 Operating Instructions Manual page 82

11
Machine zero counts
The M.Z. Cnts (Machine zero counts) field is used to specify an offset from the
machine zero position created by crossing encoder reference marks.
To specify a custom machine zero:
Highlight the M.Z. Cnts parameter
To calculate M.Z. Cnts: Machine counts = DRO value/encoder resolution
Enter the machine zero offset in the M.Z. Cnts field
Highlight the Reversed parameter
Press the Yes soft key if you want to reverse the encoder count direction
Highlight the DRO Label parameter
Press the DEC or INC soft key to select a label for the axis
Highlight the Units parameter
Press a soft key to select the unit of measure
Units options:
In
MM
Deg
Press the finish key
The parameters are saved and the Setup menu is displayed
82
Setup | Configuring encoders
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018