Table of Contents
Advertisement
Service and maintenance | Maintenance schedule
Personnel requirement
Maintenance step
Check all labels and
symbols provided on the
product for readability
Inspect electrical
connections for damage
and check their function
Check power cables for
faulty insulation and weak
points
12.4
Resuming operation
When operation is resumed, e.g. when the product is reinstalled after repair or
when it is remounted, the same measures and personnel requirements apply as
for mounting and installing the product.
Further information:
Further information:
When connecting the peripheral devices (e.g. encoders), the operating company
must ensure safe resumption of operation and assign authorized and appropriately
qualified personnel to the task.
Further information:
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Interval
Annually
Annually
Annually
"Mounting", Page 27
"Installation", Page 31
"Obligations of the operating company", Page 20
Corrective action
Contact an authorized service
agency
Replace defective cables.
Contact an authorized service
agency if required.
Replace power cables
according to the specification
12
109
Advertisement
Table of Contents
