Table of Contents
Advertisement
Setup | Loading a settings file and startup screen
11.6
Loading a settings file and startup screen
The Supervisor menu contains tools for loading a configuration settings file and a
startup screen.
A settings file can be loaded from a USB drive when the configuration parameters
from a previous setup session have been saved. This eliminates the need to
configure the product manually. A settings file also contains any error correction
data that existed when the settings file was saved.
Further information:
A startup screen image can be loaded from a USB drive to display custom graphics
when the power is turned on.
.
To load a settings file and startup screen:
Insert a USB drive containing the
file into the USB port
Highlight the Supervisor menu
Highlight the Password field
Enter the password
Press the enter key
Highlight the Password field again
The Load..., Save..., and Startup soft keys are displayed
To load a settings file:
Press the Load... soft key
Follow the instructions shown on the display
To load a startup screen:
Press the Startup soft key
Follow the instructions shown on the display
Press the finish key
The parameters are saved and the Setup menu is displayed
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
"Saving a settings file", Page 106
settings.bin
file and/or the
startup.txt
11
77
Advertisement
Table of Contents
