Entering The Supervisor Password And Startup Zero - HEIDENHAIN QUADRA-CHEK ND 1100 Operating Instructions Manual

11
11.5

Entering the supervisor password and Startup Zero

The Supervisor menu contains the Password data field and Startup Zero
parameter.
Most setup parameters are password-protected and setup can only be performed
after the password is entered.
To enter the password:
Highlight the Supervisor menu
Highlight the Password field
Enter the password '070583'
A machine zero can be set by crossing reference marks or by prompting for a hard
stop.
To require a machine zero on startup:
Highlight the Startup Zero parameter
Press the Yes soft key
Press the finish key
The parameters are saved and the Setup menu is displayed
76
Setup | Entering the supervisor password and Startup Zero
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018