Table of Contents
Advertisement
11
11.1
Software setup
Operating parameters must be configured prior to using the product for the first
time, and any time part measurement, reporting or communication requirements
change. Day to day use of the product does not require reconfiguration of software
settings.
Software can be configured manually using the setup menu screens, or
automatically by loading a settings file saved after a previous setup session.
Further information:
Parameters configured in setup screens will be retained until:
The data-backup battery is changed
The data and settings are cleared by maintenance personnel
Parameters are changed using the Setup menu screens
Certain software upgrades are performed
Previously saved settings files are loaded
72
Parameter changes made in any of the setup screens can change
the operation of the product. For this reason, setup parameters
are password-protected. Only qualified personnel should be given
password access to setup screens.
Further information:
"Entering the supervisor password and Startup
Zero", Page 76.
"Loading a settings file and startup screen", Page 77.
Setup | Software setup
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Advertisement
Table of Contents
