10
10.1
External operation
The product can be operated by commands issued from an external device
connected to the RS-232 data interface.
There are two sets of commands available:
Key emulation commands
Unit control commands
10.1.1
Key emulation commands
Key emulation commands emulate pressing a key on the product.
Commands can use one of the following the syntaxes:
@<value><CR>
KEY <#><CR>
Example
To emulate pressing the Print button:
Type
Press the Enter key on the computer keyboard
60
- the key is defined by the text contained in
- the key is defined by the numeric value contained in
Remote keypad commands are only available if a remote keypad is
attached.
at the command line
@PRINT
External operation | External operation
<value>
<#>
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018