Table of Contents
Advertisement
11
Special menu functions:
Name
DMS/DD
Zero
Zero 2
Send X
Send Y
Send Z
Send Q
Send 2
Send 3
Send 4
Cl Datums
MinMax
Preset!
MCS
POE 0/1
+- Axis
FastOut
SendAlw
SendMin
SendMax
SendRange
Press the enter key to complete the assignment
Press the finish key
The parameters are saved and the Setup menu is displayed
96
Description
Toggles the display of angles between degrees, minutes, and
seconds and decimal degrees.
Zeroes the X axis.
Zeroes the X and Y axes.
Sends the current X axis data to a computer or serial printer
through the RS-232 port.
Sends the current Y axis data to a computer or serial printer
through the RS-232 port.
Sends the current Z axis data to a computer or serial printer
through the RS-232 port.
Sends the current Q axis data to a computer or serial printer
through the RS-232 port.
Sends the current X and Y axes data to a computer or serial
printer through the RS-232 port.
Sends the current X, Y, and Z axes data to a computer or
serial printer through the RS-232 port.
Sends the current X, Y, Z, and Q axes data to a computer or
serial printer through the RS-232 port.
Clears all datums.
Displays the maximum and minimum encoder count on
the selected axis. An absolute range (from the minimum to
maximum) is displayed as well.
Applies last preset value to the current position.
Prompts you for verification to clear all datums and prompts
you to re-establish machine zero coordinates.
Turns the Print On Edge function on or off.
Reverses the axis count direction.
Sets the product to RS-232 data streaming mode.
While the Data field in the Ports menu is set to Position this
function continuously outputs data to a computer or serial
printer via the RS-232 port. Selecting the function once will
turn the output on and selecting again will turn it off.
Sends the minimum value of a MinMax measurement to a
computer or a serial printer via the RS-232.
Sends the maximum value of a MinMax measurement to a
computer or serial printer via the RS-232 port.
Sends the range value of a MinMax measurement to a
computer or serial printer via the RS-232 port.
Setup | Assigning hot keys
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Advertisement
Table of Contents
