HEIDENHAIN QUADRA-CHEK ND 1100 Operating Instructions Manual page 98

11
Print Edges formats:
Format
Standard
Stf2
Stf3
MORA
MORA-C
98
Description
Each axis is printed as displayed on the screen.
Data:
X = 1.234
Y = -2.503
Printed:
X 1.234 mm
Y -2.503 mm
A 4 digit output count. Each axis is printed with 6 places before the
decimal and 2 after. Includes a second printout of the last value for
use in determining the edge direction.
Data:
X = 1.245
Y = -30.506
Z = 0.010 27th print
Printed:
N 0027+000001.25-000030.51+000000.01
N 0027+000001.20-000030.00+000000.01
Each axis is printed with 5 places before the decimal and 3 after.
Includes a second printout of the last value for use in determining
the edge direction.
Data:
X = 1.245
Y = -30.506
Z = 0.010 27th print
Printed:
N 0027+00001.245-00030.506+00000.010
N 0027+00001.200-00030.000+00000.010
Each axis is printed as 7 digits without a decimal point.
Data:
X = 1.245 Y = -30.506
Z = 0.010
Q = 25.401
Printed:
+0001245-0030506+0000010+0025401+0000013
Each axis is printed as 7 digits without a decimal point.
Data:
X = 1.245
Y = -30.506
Z = 0.010
Q = 25.401
Printed:
+0001245-0030506+0000010+0025401+0000017
Setup | Formatting printed data
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018