Table of Contents
Advertisement
2
2.1
General safety precautions
General accepted safety precautions, in particular the applicable precautions
relating to the handling of live electrical equipment, must be followed when
operating the system. Failure to observe these safety precautions may result in
personal injury or damage to the product.
It is understood that safety rules within individual companies vary. If a conflict
exists between the material contained in these instructions and the rules of a
company using this system, the more stringent rules take precedence.
2.2
Intended use
The product performs 2, 3 or 4 axis measurements using analog or TTL encoders.
The product can be used with optical comparators and touch probes as part of in-
line production or in final quality inspection.
The product must only be operated when in proper and safe condition.
Any other use of the product or any use beyond that specified is considered
improper use and may cause hazards and damage.
The following functions are available in the product:
Reference mark evaluations for distance-coded and single reference encoders
Linear and segmented linear error correction
Scaling factor for parts that expand or shrink
Multilingual user interface user defined via menu option
Soft key functions change based on user activity
Arrow keys for easy navigation of lists and menus
Two datums for absolute and incremental measurements
Axis zero and preset keys for establishing datums
2.3
Improper use
When the product is used it must be ensured that no hazard to persons can result.
If any such hazard exists, appropriate measures must be taken by the operating
company.
In particular, the product must not be used in the following applications:
Use and storage outside the specifications
Outdoor use
Use in potentially explosive atmospheres
Use of the product as part of a safety function
18
The product supports the use of a wide variety of peripheral devices
from different manufacturers. HEIDENHAIN cannot make any
statements on the intended use of these devices. The information on
their intended use, which is provided in the respective documentations,
must be observed. If no such information has been supplied, it must be
requested from the manufacturers concerned.
Safety | General safety precautions
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Advertisement
Table of Contents
