Unit Control Commands - HEIDENHAIN QUADRA-CHEK ND 1100 Operating Instructions Manual

10
10.1.2

Unit control commands

Unit control commands control the behavior of the product.
Commands can use one of the following the syntaxes:
<command><CR>
<command><space><value><CR>
Example
To emulate pressing the Print button:
Type
Press the Enter key on the computer keyboard
Commands
Command
BAUD?<CR>
BAUD <value>
PARITY?
PARITY <value>
DATABIT?
DATABIT <value>
STOPBIT?
STOPBIT <value>
NAME?
CONTRAST <value>
64
at the command line
PRINT
Description
Returns the serial port baud rate.
Sets the serial port baud rate.
VALUE
1200
2400
4800
9600
Returns the serial port parity as an integer.
0 = None
1 = Odd
2 = Even
Sets the serial port parity.
VALUE
NONE
ODD
EVEN
Returns the serial port data length.
Sets the serial port data length.
VALUE
7
8
Returns the number of serial port stop bits.
Sets the number of serial port stop bits.
VALUE
1
2
Returns the product name.
Sets the contrast of the display.
VALUE
255.
can be one of the following:
19200
38400
57600
115200.
can be one of the following:
can be one of the following:
can be one of the following:
can be any number in the range from 0 to
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
External operation | External operation