Scaling Measurements - HEIDENHAIN QUADRA-CHEK ND 1100 Operating Instructions Manual

11
11.10

Scaling measurements

Scale factors scale measurement results using a multiplier and are useful when
measuring parts that will expand or shrink after inspections have been performed.
The Scale Factor menu contains fields and parameters for:
Enabling scale factor
Specifying a scale factor multiplier value for X, Y, Z and Q axes
Providing the user access to scale factor editing
To configure scale factor settings:
Highlight the Scale Factor menu
Highlight the X Multiplier field
Enter the scale factor multiplier for the X axis
Repeat this step for all axes
Highlight the User Settable parameter
Press the No soft key to restrict access to those who can provide the
supervisor password
Or
Press the Yes soft key to provide unrestricted access
Further information:
Page 76
Highlight the Active parameter
Press the No soft key to disable scale factor
or
Press the Yes soft key to enable scale factor
Press the finish key
The parameters are saved and the Setup menu is displayed
92
"Entering the supervisor password and Startup Zero",
Setup | Scaling measurements
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018