Menus - HEIDENHAIN QUADRA-CHEK ND 1100 Operating Instructions Manual

Basic operation | Display and soft key layout
DRO mode screen and soft keys
The DRO screen shows:
The current positions of all axes
Soft key functions for selecting:
Absolute or incremental datum
Unit of measure
DRO soft keys
Abs/Inc
MM/IN
Rad/Dia
Menu
Preset
6.6

Menus

The following menus provide access to setup menus, measurement operations,
and data transmission functions:
Setup
Extra
HEIDENHAIN | ND 1100 | Operating Instructions | 05/2018
Setup menu
Presetting a datum
Function
Press the Abs/Inc soft key to toggle between absolute
and incremental datums
Press the MM/IN soft key to toggle between millimeter
and inch unit of measures
Press the Rad/Dia soft key to toggle between radius
and diameter measurements
The rad/dia soft key is only displayed when it has been
enabled in the Encoders menu.
Further information: "Configuring encoders", Page 78
Press the Menu soft key to access the Setup and Extra
menus
Press the Preset soft key to preset a datum
6
43