Touch Screen Connector Panel - Barco FSN Series User Manual

qçìÅÜ=pÅêÉÉå=`çååÉÅíçê=m~åÉä
The figure below illustrates the connector panel on the bottom of the Touch Screen:
1
Touch Screen Knobs
Figure 3-25. Touch Screen Connector Panel
1) USB Port
Following are descriptions of each connector:
1)
2)
3)
FSN Series • User's Guide
2 3
2) DVI Connector
USB Port
One USB Port is provided for the Touch Screen's data input from the control
panel. Use the supplied cable harness for interconnection.
DVI Connector
One DVI connector is provided for the Touch Screen's video input from the control
panel. Use the supplied cable harness for interconnection. In Appendix A, refer
to the "DVI-I Connector" section on page 315 for pinout details.
Note This is a digital only input. There are no analog components
on the cable.
DC Power In
One DC Power In connector is provided for the Touch Screen's power input. Use
the supplied cable harness for interconnection.
3. Control Panel Orientation

Touch Screen Connector Panel

Touch Screen Rear
Touch Screen Bottom
Touch Screen Front
3) CPU Switch
89