Barco FSN Series User Manual page 298

7. Operations
Working with Memory Registers
içÅâáåÖ=~åÇ=råäçÅâáåÖ=jÉãçêó=oÉÖáëíÉêë
The View Mode is the only mode in which you can lock and unlock registers.
Use the following steps to lock and unlock memory registers:
1.
2.
3.
4.
5.
6.
aÉäÉíáåÖ=jÉãçêó=oÉÖáëíÉêë
The View Mode is the only mode in which you can delete registers.
Use the following steps to delete memory registers:
1.
2.
3.
4.
5.
6.
7.
298
Ensure that you are not in the Store or Recall modes. If so, cancel the mode.
Navigate the Memory Menu using one of the following methods:
~
In the Menu Bar , press {Page} to display page 2 (if required). Then,
press the {Memory} button.
~
Press and hold either the STORE or RECALL button in the control
panel's Memory Section .
Select the register that you want to lock or unlock. Two methods are available:
~
Turn the knob adjacent to the {Memory Register} button to scroll to the
desired register.
~
Press the {Memory Register} button, then on the keypad, enter the
desired register and press {Enter} .
Press {Advanced} to display the Advanced Memory Menu .
Press the {Lock Unlock} button to toggle the register's mode.
~
If currently unlocked, press {Lock Unlock} to lock the register. An " X "
appears in the table cell under the Lock heading. The register can not
be deleted or over-written.
~
If currently locked, press {Lock Unlock} to unlock the register and
remove the " X " from the table cell. The register can now be deleted and
over-written.
Repeat from step 3 to lock or unlock additional registers.
Ensure that you are not in the Store or Recall modes. If so, cancel the mode.
Navigate the Memory Menu using one of the following methods:
~
In the Menu Bar , press {Page} to display page 2 (if required). Then,
press the {Memory} button.
~
Press and hold either the STORE or RECALL button in the control
panel's Memory Section .
Select the register that you want to delete. Two methods are available:
~
Turn the knob adjacent to the {Memory Register} button to scroll to the
desired register.
~
Press the {Memory Register} button, then on the keypad, enter the
desired register and press {Enter} .
Press {Advanced} to display the Advanced Memory Menu .
Ensure that the register is unlocked. If not, unlock it using {Lock Unlock} .
Press the {Delete Register} button to delete the register. When the "confirm"
pop-up appears, press {Yes} .
Repeat from step 3 to lock or unlock additional registers.
FSN Series • User's Guide