Barco FSN Series User Manual page 272

Table of Contents

Advertisement

7. Operations
Working with Pop-ups
tçêâáåÖ=ïáíÜ=mçéJìéë
Please note the following important rules regarding pop-ups:
rëáåÖ=íÜÉ=hÉóé~Ç
There are two types of Keypads in the system:
272
When a pop-up includes a button, or a series of buttons (e.g., {Yes} or {No} ) you
must acknowledge the pop-up with a decision before any other operations can be
performed on the Touch Screen .
When a pop-up does not include a button, you must wait until the pop-up clears
before any other operations can be performed on the Touch Screen . This
condition only occurs on several menus, including:
~
System Menu (during system initialization procedures)
~
Software Menu (during the software update procedure)
~
Backup and Restore Menu (during backup and restore procedures)
~
Reset Menu (during various reset procedures)
When any pop-up is displayed, physical buttons on the control panel still function
properly.
Touch Screen Keypad — When any Value Button is pressed on the Touch
Screen , the Keypad appears, enabling you to make numeric entries. In this
mode, you can enter, trim, clear and undo entries with accuracy. In Chapter 5,
refer to the "
Using the Keypad
Control Panel Keypad — Any time that the Keypad is displayed on the Touch
Screen , you can also use the Keypad on the control panel. Here, the "physical"
Keypad works in parallel with the Touch Screen Keypad — either can be used
for entry, depending on your preference.
All Keypad functions are the same, with the following exceptions:
~
The {Undo} button is not present on the control panel's Keypad .
~
The AUTO TRAN button is not available in release 1.0.
~
Press FINE ADJUST to change the sensitivity of the knobs and the
Joystick .
When off , adjustment is coarse.
When on , adjustment is fine.
Note
The only time the Control Panel Keypad is used exclusively,
is for storing and recalling memory registers. Refer to the
"
Working with Memory Registers
full details.
" section on page 130 for details.
" section on page 291 for
FSN Series • User's Guide

Advertisement

Table of Contents
loading

Table of Contents