Barco FSN Series User Manual page 291

tçêâáåÖ=ïáíÜ=jÉãçêó=oÉÖáëíÉêë
This section provides instructions for working with memory registers. Three modes are
available: Store, Recall and View.
The following topics are discussed in this section:
•
•
•
•
•
•
jÉãçêó=oÉÖáëíÉê=lîÉêîáÉï
To understand how the memory system works on FSN Series switchers, you can think of
each memory register as having a number of individual storage compartments — one for
each of the available modules. These modules can be stored or recalled individually, or in
combination with other modules, as desired.
In addition, each module is comprised of multiple sub-sections called "Enables" which can
be toggled on or off as desired. This feature allows you to store one or more individual
"parts" of a module, rather than the entire module.
When you use the memory system, you can elect to use or bypass the "Enables" feature.
•
•
•
•
Any combination of modules can be stored in a memory register. Please note the following
important points regarding modules:
•
PGM
FSN Series • User's Guide
Prerequisite — Ensure that you are familiar with the Memory Menu . In
Chapter 5, refer to the "
Memory Register Overview
Storing Memory Registers
Recalling Memory Registers
Viewing Memory Registers
Locking and Unlocking Memory Registers
Deleting Memory Registers
Store — Panel only . If you store a register using the control panel's Keypad only
(without using the Memory Menu ), all Enables will be on by default.
Recall — Panel only . If you recall a register using the control panel's Keypad
only (without using the Memory Menu ), all Enables will be on — exactly as
originally stored in the register.
Store — Panel + Menu . If you store a register and you elect to set Enables using
the Memory Menu , you can store all or part of any selected module.
Recall — Panel + Menu . If you recall a register and you elect to adjust Enables
using the Memory Menu , you can recall all or part of any selected module — but
only those components that were originally stored in the register.
Note To quickly access the Memory Menu , press and hold either
the STORE or RECALL button.
PGM Memory Functions
When you include the PGM button in a store function, you are taking a precise
snapshot of the Program bank's complete look, including all crosspoint selections,
the T-Bar position, wipe patterns, key parameters — and most important, the state
Working with Memory Registers
Memory Menu " section on page 157.
7. Operations
291