Barco FSN Series User Manual page 54

2. FSN-1400 Orientation
Card Descriptions
k~íáîÉ=^ìñ=lìíéìí=`~êÇ
The NAC (Native Aux Output Card) is an optional output card that provides eight additional
auxiliary outputs that run at the system's native resolution. When installed, each additional
Aux output automatically becomes available in the Aux Assign Section.
Refer to the
NAC configurations in the FSN-1400.
The figure below illustrates the NAC's front edge and rear I/O connectors:
Figure 2-12. NAC front edge and rear I/O connectors
1)
2)
Following are descriptions of all NAC components:
1)
2)
3)
4)
54
"Card Slot Allocation and I/O
1
NAC
2 3
1
Front Edge
Ejectors
Card Power LED
Ejectors
Use the card's top and bottom Ejectors to remove (and re-insert) the card.
Card Power LED
The Card Power LED indicates power status for the card. Refer to the
LEDs" section on page 55 for details.
Loaded LED
The Loaded LED indicates the status of all FPGAs on the card. Refer to the
"Card LEDs" section on page 55 for details.
Native Aux Outputs
Eight BNC connectors are provided for the optional Native Aux Outputs.
Flexibility" section on page 29 for details on
Rear I/O
3) Loaded LED
4) Native Aux Outputs
FSN Series • User's Guide
SDI
1
2
3
4 4
5
6
7
8
"Card