Barco FSN Series User Manual page 262

6. System Setup
Backing up the System
_~ÅâáåÖ=ìé=íÜÉ=póëíÉã
FSN Series system setup: Step 16
In this procedure, you will back up your system configuration to a USB drive.
16
Use the following steps to back up your system to a USB Drive:
1.
2.
3.
4.
At the conclusion of this procedure, your system is completely backed up.
262
Prerequisite — Ensure that you are familiar with the Backup and Restore
Menu . In Chapter 5, refer to the "
page 234.
Ensure that your USB drive is properly inserted in the control panel's USB Port .
In the Menu Bar , press {System} to access the System Menu .
Press {Backup Restore} to display the Backup and Restore Menu .
Press {Backup System} to initiate the system backup procedure. Once the drive
is detected, you will be prompted to continue or cancel the procedure
Backup and Restore Menu
FSN Series • User's Guide
" section on