Barco FSN Series User Manual page 216

5. Menu Orientation
System Menu
q~ääó=pÉíìé=jÉåì=cìåÅíáçåë
The following functions are provided on the Tally Setup Menu 's tool bar:
•
Select
Input
Select the input to assign to
CAM1
CAM2
CAM3
CAM4
DO-1
DO-2
VT-A
VT-B
Figure 5-104. Input Selection Keypad (sample)
•
Clear
Input
•
Select
Color
216
To associate an input with a tally on the highlighted row, press {Select Input} to
display the Input Selection Keypad .
tally 6
Use the use the up ( ) and down ( ) arrows to locate the desired input, then
press {Apply} to accept. Once accepted, the input is displayed in the table.
To clear the input-to-tally association on the highlighted row, press {Clear Input}
to remove the input from the table.
Press {Select Color} to display the Select Color Pop-up , which enables you to
choose a red, green or amber color block to place in the column adjacent to the
tally number. You can also select " Clear " to remove the color block.
Note This function is designed only to assist the engineer who is
setting up tallies. It provides a visual indication on the menu
of the type of tally you are configuring — red, green or amber.
The function does not affect how the tally operates.
Close
Apply
FSN Series • User's Guide