Barco FSN Series User Manual page 83

PGM
SYS
CUST
STILL
AUX
DVE
4)
AUTO
TRAN
FSN Series • User's Guide
~
Press PGM to include the entire PGM bank in a store procedure, or
remove the bank from a recall procedure. Using the Memory Menu, if
desired, you can elect to include or exclude certain sub-sections of the
PGM bank in the procedure.
~
Press SYS to include system-related functions (such as input mappings
and input setups) in the selected store procedure, or remove the
functions from a recall procedure. Using the Memory Menu, if desired,
you can elect to include or exclude certain system sub-functions.
~
The CUST button is not available in release 1.0.
~
The STILL button is not available in release 1.0.
~
Press AUX to include all Aux bus assignments currently on the panel in a
store procedure, or remove the buses from a recall procedure. Using the
Memory Menu, if desired, you can elect to include or exclude certain
individual Aux buses.
~
The DVE button is not available in release 1.0.
Important When working with memory registers, the system will not
automatically display the Memory Menu unless you navigate
to the menu on the Touch Screen, or press and hold the
STORE or RECALL button.
Please note the following important references:
~
In Chapter 5, refer to the
complete details on all switcher memory functions.
~
In Chapter 7, refer to the
page 291 for more information about memory registers.
Keypad
The Keypad includes buttons that are arranged in a manner similar to the Touch
Screen's keypad. The following functions are context sensitive:
~
When STORE or RECALL is lit, you can enter memory registers (from 1
through 1000).
~
When a keypad appears on the Touch Screen, you can enter and trim
values for numeric functions. In this mode, the physical Keypad works in
parallel with the Touch Screen's keypad — either can be used for entry,
depending on your preference.
Following are descriptions of each Keypad button:
~
The AUTO TRAN button is not available in release 1.0.
~
Press BACKSPACE (
register by one digit with each press.
3. Control Panel Orientation
Control Panel Descriptions
"Memory Menu" section on page 157 for
"Working with Memory
←
) during a numeric entry process to clear the
Registers" section on
83