Barco FSN Series User Manual page 160

5. Menu Orientation
Memory Menu
•
•
•
•
•
160
The eight right-hand columns (under the Modules heading) indicate which
modules are included in each register. These columns correspond to the eight
categories of modules available on the panel: M/E 1 , M/E 2 , PGM , SYS (System),
Cust (Custom), Still , Aux and DVE . In Chapter 3, refer to the "
heading on page 81 for a description of each module.
Please note:
~
An " x " in a cell indicates that the module is included in the register. The
" x " does not indicate the status of the Enables within the module.
~
A blank cell indicates that the module is not part of the register.
~
If a column heading is grayed out, that module is not currently available.
Note
The M/E 2 , Cust , Still and DVE modules are not available in
release 1.0.
In the table, the yellow highlight indicates the "selected" register. There are many
ways that you can select registers, including touching, scrolling with the top knob,
and pressing the {Memory Register} value button. Refer to the "
Registers " section on page 166 for details on all register selection methods.
Press {Description} to display the keyboard, which enables you to enter a
register description (or name). Refer to the "
page 167 for details.
Press {Enables} to display the Enables Menu , which allows you to view or
modify the Enables within each module. Refer to the "
Description " section on page 161 for details.
Press {Advanced} to display the Advanced Memory Menu , which allows you to
delete registers and lock registers. Refer to the "
section on page 168 for details.
Memory Section
Selecting
Naming Registers " section on
Enables Menu
Advanced Memory Functions
FSN Series • User's Guide
"
"