Barco FSN Series User Manual page 276

7. Operations
Understanding Lookahead Preview
bñ~ãéäÉ=OW==hbv=N=iççâ~ÜÉ~Ç
Use the following steps to learn how the KEY 1 button affects lookahead preview.
1.
2.
3.
K
BLACK
E
Y
B
BLACK
G
P
S BLACK
T
Figure 7-6. M/E Bank: KEY 1 lookahead
4.
276
Press SEL to switch the key bus to KEY 1 .
Select GFX on the key bus.
In the Next Transition Group , press KEY 1 . This action arms the KEY 1 layer to
transition.
Preview
FSN
Series
CAM1 CAM2 GFX
Please note:
~
With KEY 1 selected and BG turned off, KEY 1 will transition over the
current BG source. The PST bus will not transition.
~
The source selected on PST does not appear on PVW — because it's
not part of the next transition.
~
The lookahead PVW output shows the KEY 1 source keyed over BG .
This is the perfect time to clip and adjust the key.
Note Once KEY 1 is pressed (and armed), press and hold KEY 1
to jump to the Keyer Menu for M/E 1, Key 1, where you can
clip and adjust the key on preview.
Press CUT or AUTO TRAN to cut, mix or wipe KEY 1 over the BG bus.
Program
LOGO
BG
FSN Series • User's Guide
KEY KEY
1 2