Barco FSN Series User Manual page 81

jÉãçêó=pÉÅíáçå
The Memory Section enables you to store switcher setups to memory, and recall setups
from memory back to the panel. One thousand registers are provided (1 through 1000). In
Chapter 7, refer to the
The figure below illustrates the Memory Section.
1
2
3
Figure 3-20. Memory Section
1)
2)
Following are descriptions of each section:
1)
Figure 3-21. Memory Display (sample)
FSN Series • User's Guide
"Working with Memory
S T R : 1 2 3 T i t l e
R C L : 4 5 6 B u m p e r
AUTO
STORE RECALL
TRAN
7
M/E 1 CUST
4
STILL
1
PGM AUX
SYS DVE + / -
Memory Display
Function Section
Memory Display
The figure below illustrates the Memory Display.
Store Entry Register
Recall Entry Register
~
The top line indicates the last memory register that was stored, e.g.,
STR: 123. The letters STR are constant, followed by the "store" entry
register, and the register description (as entered via the Memory Menu).
~
The bottom line indicates the last memory register that was recalled,
e.g., RCL: 456. The letters RCL are constant, followed by the "recall"
register, and the register description (as entered via the Memory Menu).
The following rules apply:
~
When you press STORE or RECALL and enter numbers from the
keypad, the appropriate register clears, and digits shift left as you type.
3. Control Panel Orientation
Registers" section on page 291 for details.
M a i n
4
Fine
Adjust
8 9
CLEAR
5 6
TRIM -
2 3
TRIM +
0 .
ENTER
4
3) Module Section
4) Keypad
S T R : 1 2 3 T i t l e
R C L : 4 5 6 B u m p e r
Control Panel Descriptions
M a i n
4
81