Default Naming Conventions - Barco FSN Series User Manual

fåéìí=jÉåì=cìåÅíáçåë
The following functions are available in the Tool Bar :
•
Map to
Note
On the Program Bank's Preset Bus, select the button on which
you want the input to appear.
Figure 5-84. Map To Pop-up
•
Input
Name
•
Un-map
•
Freeze
Off
•
Freeze
Mode
Field 1
FSN Series • User's Guide
Press {Map to} to map the selected input to the control panel. When pressed, the
Map To Pop-up appears.
Map to
On the Program Bank's Preset Bus , press the button on which you want the input
to appear. Once selected, the button mapping appears in the table's " Map "
column, and the input can now be selected on the panel.
Press {Input Name} to associate a four-character name with the selected input.
When pressed, the pop-up Keyboard appears. Enter the desired name and
press {Enter} on the Keyboard . On the panel, the name appears on the display
above the selected input. In the table, the name appears in the " Name " column.
See the " Using the Pop-up Keyboard
about the keyboard, and the "
page 193 for details about default input names.
Press {Un-Map} to remove the selected input mapping from the panel. When
pressed, the input is removed, and its name is also removed from the
programmable display. Please note:
~
If the input is mapped to more than one panel location, all locations are
un-mapped and removed.
~
When an input is un-mapped, the input name and all associated setup
parameters are retained. Only the mapping is removed from the panel.
For both native and universal inputs, press {Freeze} to toggle the freeze "state" of
the selected input.
~
Select On to freeze the input.
~
Select Off to un-freeze the input.
Note The button's state ( On or Off ) changes automatically if you
perform a freeze or un-freeze using the control panel's FRZ
and UN FRZ custom control functions. In Chapter 7, refer to
the " Using Custom Control Functions
for details.
For interlaced native resolutions only, press {Freeze Mode} to display the Freeze
Mode Pop-up . The following "freeze mode" options are available:
~
Field 1 — freezes the source on field 1.
~
Field 2 — freezes the source on field 2.
5. Menu Orientation
Close
" section on page 133 for more details

Default Naming Conventions

System Menu
" section on
" section on page 300
191