Basic Fsn Series System; Required And Optional Cards; M/E Features - Barco FSN Series User Manual

póëíÉã=`çåÑáÖìê~íáçå
The following topics are discussed in this section:
•
•
•
_~ëáÅ=cpk=pÉêáÉë
Because the FSN Series uses modular components, many flexible system configurations
can be designed to suit your exact production requirements.
The basic FSN Series system consists of the following:
•
•
•
•
•
•
oÉèìáêÉÇ=~åÇ=léíáçå~ä=`~êÇë
Required FSN Series cards are described below.
•
•
Optional FSN Series cards are described below.
•
FSN Series • User's Guide

Basic FSN Series System

Required and Optional Cards

M/E Features

=
póëíÉã
One FSN-150 control panel.
One FSN-1400 chassis.
One System Card (required on all systems).
One Crosspoint M/E Card (required on all systems).
One eight-channel NIC (Native Input Card).
One two-channel UIC (Universal Input Card).
System Card — this required card includes:
~
Video reference input and loop through.
~
Configurable video reference output.
~
Ethernet port (10/100).
~
One tally connector (24 contact closures).
~
One GPIO connector (four GPI ports and eight GPO ports).
In Chapter 2, refer to the "System
Crosspoint M/E Card — This required card includes:
~
Crosspoint matrix.
~
M/E and PGM circuitry.
~
Dedicated DSK cut and fill inputs.
~
Six Aux outputs.
~
Four PGM outputs (PGM [2x], PVW and CLN).
~
Three M/E 1 outputs (PGM 1, PVW 1 and CLN 1).
~
Three M/E 2 outputs (PGM 2, PVW 2 and CLN 2).
In Chapter 2, refer to the "M/E
NIC (Native Input Card)
The NIC provides eight native video input channels, which run at the switcher's
selected native output resolution. In Chapter 2, refer to the
section on page 47 for details.
Card" section on page 38 for details.
Card" section on page 43 for details.
NK==fåíêçÇìÅíáçå
About the FSN Series
"Native Input Card"
23