Barco FSN Series User Manual page 41

13) Ref Out
14) Tally Connector
15) GPIO Connector
FSN Series • User's Guide
One BNC connector is provided for a Reference Output signal.
Note This function is currently not implemented.
One DB-50 connector is provided for tally, with 24 contact closures available. In
Appendix A, refer to the "Tally
Chapter 6, refer to the "Tally
One DB-25 connector is provided for GPIO, with four input ports and eight output
ports. In Appendix A, refer to the
Note This function is currently not implemented.
2. FSN-1400 Orientation
Connector" section on page 318 for pinouts. In
Setup" section on page 259 for setup details.
"GPIO Connector" section on page 319.
Card Descriptions
41