Barco FSN Series User Manual page 215

q~ääó=q~ÄäÉ
The figure below illustrates a sample Tally Table .
Tally Input
1 CAM1
2 CAM1
3 CAM2
4 CAM2
5 CAM3
6 CAM3
7
8
Figure 5-103. Tally table (sample)
The Tally Table enables you to associate inputs with tally relays, and set tally closures on
an output-by-output basis. One row is provided for each of the 24 available tallies.
•
•
The following columns of information are provided:
•
•
•
•
•
FSN Series • User's Guide
PGM PST
PGM ME1 ME2 PGM ME1
x x
x
x x
x
x x
x
The yellow highlight indicates the tally that you want to set up. You can touch any
row to move the highlight, or use the top Select Tally knob to scroll vertically.
The blue highlight indicates the output for which you want to set (or clear) a relay
closure. You can touch any cell to move the highlight, or use the Select Output
knob to scroll horizontally. Once an output is selected, press {Set Tally Closure}
or {Clear Tally Closure} as required.
Tally — two columns are provided for tally:
~
The left-hand column indicates the selected relay ( 1 through 24 ).
~
The right-hand column is simply an indication of the type of tally you wish
to set: red, green or amber. Use the {Select Color} button to select the
desired color.
Input — indicates the input that you wish to associate with the highlighted tally.
Use the {Select Input} button to select the desired input, or the {Clear Input}
button to remove the input from the table.
PGM — columns are provided for all Program outputs on the M/E Card . If a
column heading is grayed out, that output is not available.
PST — columns are provided for all Preview outputs on the M/E Card . If a
column heading is grayed out, that output is not available.
Installed Aux Outputs — columns are provided for all installed Auxiliary outputs
on the M/E Card , and on the optional UOC and NAC cards. If the associated
optional cards are not installed, those column headings do not appear.
Outputs
Installed Aux Outputs
ME2 1 2 3 4 5
x
x
x
x
x
x
5. Menu Orientation
System Menu
6
215