Barco FSN Series User Manual page 203

mêçÅÉëëáåÖ=pÉÅíáçå
The figure below illustrates the Processing Section for universal inputs:
Processing
Figure 5-92. Processing Section, Universal Inputs
The following adjustments are provided:
•
Sharp-
ness
•
Pulldown
Comp
Off
•
De-
Interlace
Motion
•
Motion
Threshold
FSN Series • User's Guide
Pulldown De-
Sharp-
Comp Interlace
ness
Off Motion
Press {Sharpness} to display the Sharpness value button. Use the button (or
knob) to set the input's sharpness.
Range : -16 (very smooth) to 15 (very sharp)
Default : 0
Press {Pulldown Comp} to toggle the Pulldown Compensation mode on or off.
~
Select On to apply pulldown compensation, in order to process video
derived from film material.
~
Select Off to disable the mode. This is the default mode.
Note This function applies only for standard video (component, s-
video, composite) inputs.
Press {De-Interlace} to display the De-Interlace Pop-up . If the input is
interlaced, this function enables you to set how the system processes the input.
The following options are available:
~
Select Motion Adaptive to use motion adaptive de-interlacing. In this
mode, the {Motion Threshold} button appears. See below for details.
~
Select Field to Frame to use field-to-frame de-interlacing. This mode
avoids motion artifacts by converting individual input fields to progressive
output frames.
Note This function is available for interlaced formats only. The
button does not appear for progressive scan inputs.
If Motion Adaptive de-interlacing is selected, press {Motion Threshold} to
adjust the threshold of the motion adaptive de-interlacer. Because adjustment is
rarely required, it is recommended that you leave the function at its default setting.
Range : 0 to 15
Default : 15
5. Menu Orientation
Motion
Threshold
System Menu
203