Barco FSN Series User Manual page 66

3. Control Panel Orientation
Control Panel Descriptions
2)
Transition
Figure 3-7. T-Bar and Transition LEDs
3)
BG
Figure 3-8. Next Transition Group
66
~
DSK Source — (directly above the DSK button), indicates the current
source assigned to the downstream keyer. When you select another
source on the Phantom Key Bus, the source label updates.
~
Current Transition Rate — indicates the auto-transition rate loaded in
the PGM bank. This rate is used by the AUTO TRAN and DSK
functions. Use the Transition Menu to change rates. In Chapter 5, see
the "Transition Menu" section on page 134 for details.
~
Current Fade to Black Rate — indicates the auto-transition rate for the
fade to black (FTB) function. Use the Transition Menu to change rates.
T-Bar and Transition LEDs
The T-Bar provides manual transition control for the layers enabled in the Next
Transition Group. For both manual and automatic transitions, the Transition
LEDs indicate the position of the transition in progress.
LEDs
T-Bar functionality is identical for both the M/E bank and the PGM bank. In
Chapter 7, refer to the "Understanding the T-Bar and Transition
on page 280 for complete details.
Next Transition Group
The two buttons in the Next Transition Group indicate which specific
combination of PGM bank layers is enabled (or "armed") for the next transition.
The state of these buttons affects the bank's "lookahead" preview output.
DSK
To use the group, simultaneously press the combination of buttons that you wish
to enable. Any combination can be pressed. Whichever combination you enable
automatic disables those buttons that were not pressed.
For example:
If BG and DSK are currently lit, pressing BG turns the BG button
on, and turns off the DSK button.
If DSK is currently lit, pressing BG and DSK turns the BG and DSK
buttons on.
T-Bar
FSN Series • User's Guide
LEDs" section