Barco FSN Series User Manual page 85

ENTER
gçóëíáÅâ
The Joystick is a three axis controller that is used to adjust a variety of switcher
parameters. The figure below illustrates the Joystick and its three axes of control:
Figure 3-22. Joystick
For example, when a PIP is selected, the Joystick can be assigned to manipulate the
PIP's size and position as follows:
•
•
•
FSN Series • User's Guide
~
Press ENTER to complete a store, recall, or numeric entry function. For
store and recall functions, once pressed, the selected modules are
stored to memory or recalled to the panel, and all lit buttons in the
Memory Section turn off.
Y-Axis Control
Z-Axis Control
X-Axis Control — Move the Joystick left and right to move the PIP left and right,
respectively.
Y-Axis Control — Move the Joystick up and down to move the PIP up and down.
Z-Axis Control — Twist the Joystick's top knob clockwise and counterclockwise
to size the PIP larger or smaller.
3. Control Panel Orientation
Control Panel Descriptions
X-Axis Control
85