Card And I/O Installation; I/O Panel Insertion; I/O Panel Removal; Card Insertion - Barco FSN Series User Manual

`~êÇ=~åÇ=fLl=fåëí~ää~íáçå
The following cards are pre-installed in the FSN-1400 chassis:
•
•
•
•
Additional NICs and UICs can be installed according to the table below. Please note the
following important recommendations:
•
•
•
The table below outlines card slot allocation within the FSN-1400 chassis. Use this chart
for reference during the following procedures, and remember that all cards and I/O panels
are hot-swappable.
Table 4-4. FSN Series chassis card slot allocations
Card Type
System (Required card)
M/E (Required card)
NIC (Native Input Card), 8-channel
UIC (Universal Input Card), 2-channel
Use the procedures in the following sections to insert (and extract) cards, as required:
•
•
•
•
FSN Series • User's Guide
System card: slot 14
M/E card: slot 8
1 x NIC: slot 1
1 x UIC: slot 7
Install additional UICs in slot 6, then 5, etc.
Install additional NICs in slot 2, then 3, etc.
In this way, the two "flexible" slots (3 and 4), can be reserved for either NICs or
UICs until needed.
Note Only the currently available cards are listed in the table.
Max. # of Cards per Chassis
1
1
4
5

I/O Panel Insertion

I/O Panel Removal

Card Insertion

Card Removal

4. Installation

Card and I/O Installation

Slot Number(s)
14
8
1 through 4
3 through 7
103