Barco FSN Series User Manual page 75

4)
MIX
Figure 3-15. Effects Group
MIX
FSN Series • User's Guide
~
All three buttons in the Next Transition Group work in combination with
the M/E's MIX, WIPE, CUT, AUTO TRAN button and the T-Bar.
For example:
If you enable BG and MIX, and then press AUTO TRAN, the
transition automatically mixes to the selected source.
If you enable KEY 1, BG and WIPE, and then move the T-Bar, the
transition manually wipes to the selected source plus key.
If you enable BG and KEY 2 and press CUT, the transition cuts to
the selected source and cuts the key on or off.
In Chapter 7, use the following section for reference:
~
Refer to the "Understanding Lookahead
for additional information about lookahead preview functionality.
~
Refer to the "Understanding Switcher
a discussion of video layers within the switcher.
Effects Group
The three buttons in the Effects Group indicate which effects are enabled (or
"armed") for the next transition in the M/E.
FX
WIPE
TRIG
To use the group, press the button(s) for the transition you want to enable.
Note MIX and WIPE are mutually exclusive.
Following are descriptions of each button in the Effects Group:
~
Press MIX to arm the M/E for a mix, using the layers enabled in the Next
Transition Group. The mix can be performed manually with the T-Bar,
or automatically with AUTO TRAN.
Transition combinations are:
• MIX + BG: Background mix
• MIX + KEY 1: Mix Key 1, on or off
• MIX + KEY 2: Mix Key 2, on or off
• MIX + KEY 1 + KEY 2: Mix Key 1 and Key 2, on or off
• MIX + BG + KEY 1: Mix background and Key 1
• MIX + BG + KEY 2: Mix background and Key 2
• MIX + BG + KEY 1 + KEY 2: Mix background, Key 1 and Key 2
Note Press and hold MIX to display the Transition Menu, which
enables you to set transition rates and select transition
curves. In Chapter 5, refer to the
on page 134 for details.
3. Control Panel Orientation
Control Panel Descriptions
Preview" section on page 274
Layers" section on page 268 for
"Transition Menu" section
75