Deleting Registers - Barco FSN Series User Manual

5. Menu Orientation
Memory Menu
^Çî~åÅÉÇ=jÉãçêó=cìåÅíáçåë
The Advanced Memory Menu provides access to the following memory functions:
•
Advanced
•
Please note the following important points regarding the Advanced Memory Menu :
•
•
•
These functions occur to prevent you from locking, unlocking or deleting a memory register
during a Store or Recall operation.
içÅâáåÖ=~åÇ=råäçÅâáåÖ=oÉÖáëíÉêë
The "lock/unlock register" feature is available in the following memory mode only:
•
Lock
Unlock
By default, a newly stored memory register is unlocked. As desired, you can lock a
register to prevent accidental deletion, or accidental over-writing.
To use the feature:
•
•
On the Advanced Memory Menu , press the {Lock Unlock} button to toggle the mode.
•
•
aÉäÉíáåÖ=oÉÖáëíÉêë
The "delete register" feature is available in the following memory mode only:
•
Delete
Register
All registers except "locked" registers can be deleted. This action clears the selected
memory register completely. To use the feature:
•
•
On the Advanced Memory Menu , ensure that the register is unlocked. Then, press the
{Delete Register} button to delete the register. You will be asked to confirm.
168
Locking and Unlocking Registers

Deleting Registers

the Advanced Memory Menu is only available in View Mode .
If you initiate a Store or Recall function and you are not in the Advanced
Memory Menu , the {Advanced} button is grayed out.
If you initiate a Store or Recall function and you are already in the Advanced
Memory Menu , the system automatically takes you back to the Memory Menu .
View Mode
From the Memory Menu , highlight the desired register in the table, and then
press {Advanced} .
From the Enables Menu , press {Advanced} .
If currently unlocked, pressing {Lock Unlock} locks the register, and an " X "
appears in the appropriate table cell under the Lock heading. If you attempt to
delete or over-write the register, an error message pops up on screen.
If currently locked, pressing {Lock Unlock} unlocks the register and removes the
" X " from the table cell.
View Mode
From the Memory Menu , highlight the desired register in the table, and then
press {Advanced} .
From the Enables Menu , press {Advanced} .
FSN Series • User's Guide