Barco FSN Series User Manual page 52

2. FSN-1400 Orientation
Card Descriptions
råáîÉêë~ä=lìíéìí=`~êÇ
The UOC (Universal Output Card) is an optional two-channel scaler card that creates
scaled video and/or computer Aux outputs up to UXGA or 1920 x 1080. Users can set the
output resolution to be different from (or the same as) the system's native resolution.
When installed, each universal Aux output automatically becomes available in the Aux
Assign Section, and the output resolutions are set using the Aux Output Setup Menu.
Refer to the
UOC configurations in the FSN-1400.
The figure below illustrates the UOC's front edge and rear I/O connectors:
Figure 2-11. UOC front edge and rear I/O connectors
1) Ejectors
2) Card Power LED
Following are descriptions of all UOC components:
1)
2)
3)
52
"Card Slot Allocation and I/O
1
UOC
2 3
1
Front Edge
3) Loaded LED
4) Universal Output 1
Ejectors
Use the card's top and bottom Ejectors to remove (and re-insert) the card.
Card Power LED
The Card Power LED indicates power status for the card. Refer to the
LEDs" section on page 55 for details.
Loaded LED
The Loaded LED indicates the status of all FPGAs on the card. Refer to the
"Card LEDs" section on page 55 for details.
Flexibility" section on page 29 for details on
1
2
Rear I/O
5) Universal Output 2
FSN Series • User's Guide
4
5
"Card