fåéìí=pÉíìé
From the System Menu , press {Input Setup} to display the Input Menu , which enables
you to set up universal switcher inputs. The figure below illustrates a sample Input Menu .
Figure 4-47. Input Menu (sample)
The Input Menu is divided in half. The left side of the Palette shows the Rear I/O View ,
while the right side shows the Input Table .
To set up an input, press the desired connector in the Rear I/O View . In the Input Table ,
the selected input is automatically highlighted. Once selected, you can name the input,
and set up a variety of input parameters.
The following topics are discussed in this section:
•
•
•
•
•
•
FSN-1004 • User's Guide • Rev 00
Rear I/O View Description
Connector Colors
Input Table Description
Input Menu Functions
Input Setup Menu
Input Setup Menu Tool Bar Functions
4. Menu Orientation
System Menu
117