Table of Contents
Advertisement
DECLARATION OF CONFORMITY
Application of Council Directive:
Manufacturer's Name:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
EC-Type Examination Certificates:
Flow Module Type 2150EX: Baseefa04ATEX0083
Sensor Type AV2150EX: Baseefa04ATEX0101X
The 2150EX flow Monitoring System is covered
by a QA Notification to Annex 4 of the 94/9/EC
Directive issued by Baseefa NB number 1180.
Standard
EN61000-4-2
Electrostatic Discharge
EN61000-4-3
*Radiated RF Immunity
EN61000-4-4
Electrical Fast Transient
EN61000-4-6
Conducted RF on I/O lines
CISPR11/
RF Emissions
EN 55011
Sensor flow accuracy degradation is evident in RF fields above 3V/m between 210MHz and 440MHz.
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of April 15, 2004.
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-2002-333
Rev A
89/336/EEC – The EMC Directive
73/23/EEC – The Low Voltage Directive
94/9 EC – The ATEX Directive
Teledyne Isco, Inc.
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments:
The device is a water flow monitoring instrument consisting of a battery
power supply housed inside a black plastic enclosure (base) and a flow
monitoring electronic circuit board assembly housed inside a plastic
enclosure that is mounted on top of the power supply enclosure. The device
is intended for operation in ambient temperature range of -40 to +60 C.
2150EX Node and AV2150EX Sensor
Year of Issue:
2004
EN 50014:1997 + Amd 1&2, Electrical Apparatus for Potentially Explosive
EN 50020:2002, Electrical Apparatus for Potentially Explosive Atmospheres –
EN 50284:1999, Special Requirements for Construction, Test, and Marking of
EN 61010-1, Safety Requirements for Electrical Equipment for
EN 61326:1998, EMC Requirements for Electrical Equipment for
EN 60529:1992, Degrees of Protection Provided by Enclosure
Description
Level 2 – 4Kv contact discharge
Level 3 – 8Kv air discharge
80 MHz to 1000MHz 80% AM at 1KHz
Level 1 – 10V/m
Level 1 – 1Kv on I/O Cables
150 KHz to 80 MHz,
Level 2 - 3Vrms, 80% modulated
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Atmospheres – General Requirements
Intrinsically Safe "i"
Electrical Apparatus of Equipment Group II Category 1G
Measurement, Control, and Laboratory Use
Measurement, Control, and Laboratory Use
Self Certified as IP-65
Severity Applied
Performance Criteria
A
A
*
B
A
B
Advertisement
Table of Contents
