Measurement By Auto Readout In One Shot Mode - Olympus STM7 Instructions Manual

a
c
b
f
d
42
4

Measurement by auto readout in ONE SHOT mode

e
g
} To perform this operation, the setting to transmit the counter data
automatically must be ON when setting the DIP switch. For details,
h
refer to "5-1 Preparation (setting DIP switch and rotary switch)" (page
49).
1
Press the AF MODE button a on the focus controller STM7-MCZ.
(LASER LED b on the front of the autofocus unit is turned ON and
SHOT of the digital indicator STM7-DI blinks to be in the AF standby
status.)
2
Turn ON the objective magnification display LED d on the front of
the autofocus unit you want to use by using the AF OB button c
of the focus controller. Then, engage the objective displayed into the
light path.
3
Approximately focus on the specimen (page 28) and bring the point at
which you want to detect focusing to the center of crosslines of the
eyepiece (page 36).
4
Press the DATA/HALF button e on the focus controller.
(SHOT of the digital indicator is turned ON.)
When the focusing position is detected, a short beep indicating completion is
generated and the coordinates are output to the external computing device.
(FOCUS LED f on the front of the autofocus unit is turned ON and
SHOT of the digital indicator blinks.)
When the focusing position cannot be detected, three short beeps
indicating an error are generated, FOCUS LED f on the front of the
autofocus unit blinks and SHOT of the digital indicator is turned ON.
When moving the focusing unit closer to the focusing position by
rotating the FOCUS button g of the focus controller or the coarse
focusing knob h , AF is executed again automatically and the
coordinates are outputted.
} When using a foot switch, AF and auto readout can be executed by
pressing the foot switch in place of the DATA/HALF button e .
} AF and auto readout can be executed by pressing the DATA/HALF
button of the digital indicator.
5
To exit AF, press the AF MODE button a on the focus controller twice.
(LASER LED b and FOCUS LED f on the front of the autofocus
unit and SHOT of the digital indicator are turned OFF.)