Olympus STM7 Instructions Manual page 76

External processing device (DSUB25Pin Female)*
Coded quintuple
revolving nosepiece
· When connecting DISPLAY of the control box with the digital indicator, check the pin positions of the
CAUTION
connector of the cable for digital indicator.
· When connecting Z-MOTOR of the control box with the motorized frame, check the pin positions of the
connector of the cable for motorized frame.
} Since the length or the shape of cables is similar, distinguish them by the pin positions of the connector.
70
Control box
STM7-CB/STM7-CBA
Power cord
Connector of cable for
digital indicator
· Controller
· Printer (DSUB9Pin Male)*
Connector of cable for
motorized frame
} If no instruction is specified to the
connector, the cables from the frame,
stage or other modules are connected.
} For connections of positions with *
mark, contact Olympus for details.