c
d
e
34
4
Replacing the eyepiece cross
The cross on each eyepiece sleeve can be replaced except with the
b
MM6-OCC10X.
The size other than the cross should be diameter of 24 mm and
thickness of 1.5 mm.
a
To attach a new cross, remove the cross-frame b and drop in the
cross a so that the side with indications faces downwards.
Attach the cross-frame b again before observation.
5
Switching the light path (MM6-ETR)
Slide the light path selector knob c to select the desired light path.
Indication
6
Erect image monocular observation tube (MM6-EMO)
The MM6-EMO is designed for monocular observation of erect images.
The upper clamping screw d is used to clamp the eyepiece and
the lower clamping screw e is used to clamp the eyepiece adapter.
Lever Position
Light Ratio
Pushed in
100% observation
Pulled out
100% TV/photo
Purpose
Observation
TV observation,
photomicrography